vacuum auto feeder Manufacturers

The clamping force of the injection molding machine is 2000T-2400T, and the molding capacity is 200kg/H-240kg/H. If it is an air-cooled chiller, choose 30HP cooling capacity, and the model is XYFL-30.

The reason for the low suction pressure of the chiller may be the problem of the water pump, the liquid level of the water tank and the connection of the water pipe. Solutions to these problems include checking the water pump for leaks or clogs to make sure the pump is functioning properly; checking the tank level to rule out leaks or water leaks in the system; and checking that plumbing connections are tight to rule out leaks or loose connections. If the problem persists, it is recommended to contact professional chiller maintenance service personnel for inspection and maintenance.

1. Jiusheng tells you the principle of chiller refrigeration: the liquid refrigerant (refrigerant/R22/R407C/R410A) absorbs the heat of the cooled object in the evaporator and evaporates into steam, and the compressor continuously removes the produced steam from the evaporator It is extracted and compressed into high-temperature and high-pressure steam, which is then sent to the condenser. The high-temperature and high-pressure steam dissipates heat to the cooling medium (such as water, air, etc.) and condenses into a high-pressure liquid. After being depressurized by the throttling mechanism, it enters the evaporator, vaporizes again, absorbs the heat of the cooled substance, and circulates again and again to achieve refrigeration.

​This is a 5-horsepower evaporative cooling air conditioner, which is about 40-50% more energy-efficient than traditional central air conditioners. It consumes about 3.6 degrees of electricity per hour, while central air conditioners consume about 9 degrees of electricity per hour. It consists of refrigeration components such as compressors, condensers, evaporators, expansion valves, wet curtains and water pumps. Its advantages are not only energy-saving, but also easy to install.

The clamping force of the injection molding machine is 800T-1200T, and the molding capacity is 80kg/H-120kg/H. If it is an air-cooled chiller, choose 15HP cooling capacity, and the model is XYFL-15. If it is a water-cooled chiller, choose 15HP cooling capacity. The model is XYSL-15. The water-cooled chiller needs to be connected to a pipeline water pump and a water tower. The air-cooled chiller can be used independently and is easy to install.

The leader in the chiller industry - Dongguan Jiusheng Machinery Co., Ltd. today will explain to you the common faults and maintenance of water-cooled chillers. A range of products like our 8HP Water-cooled Box Chiller are great options for you! For the maintenance of the chiller, the cooling water of the water-cooled condenser is an open circulation loop, and the tap water generally used is circulated through the cooling tower.