industrial plastic vacuum auto loader Manufacturers

The clamping force of the injection molding machine is 240T-400T, and the molding capacity is 24KG-40kg/H. If it is an air-cooled chiller, choose 5HP cooling capacity, and the model is XYFL-05. If it is a water-cooled chiller, choose 5HP cooling capacity. The model is XYSL-05. The water-cooled chiller needs to be connected to a pipeline water pump and a water tower. The air-cooled chiller can be used independently and is easy to install.

When purchasing a screw chiller, it is necessary to fully consider that the cooling capacity matches the needs of the place of use, the working environment is suitable for air cooling or water cooling, the type of refrigerant meets the requirements and needs of environmental protection, and the brand and grade of the compressor are high;

1. Jiusheng tells you the principle of chiller refrigeration: the liquid refrigerant (refrigerant/R22/R407C/R410A) absorbs the heat of the cooled object in the evaporator and evaporates into steam, and the compressor continuously removes the produced steam from the evaporator It is extracted and compressed into high-temperature and high-pressure steam, which is then sent to the condenser. The high-temperature and high-pressure steam dissipates heat to the cooling medium (such as water, air, etc.) and condenses into a high-pressure liquid. After being depressurized by the throttling mechanism, it enters the evaporator, vaporizes again, absorbs the heat of the cooled substance, and circulates again and again to achieve refrigeration.

The chiller can be divided into two types in the application of the extruder, one is to cool the extrusion die, and this one can use a standard chiller. There is another type of water tank for cooling the extruder line groove. This model needs to use a shell-and-tube chiller (the evaporator is a shell-and-tube closed type). Jiusheng will teach you to match the corresponding power of the extruder with a 100KG output.

In summer, many factories run chillers 24 hours a day, which is very efficient. But in winter, many factories in some areas do not need chillers for cooling. When the chiller is shut down, the chiller must be maintained.

On June 30, a 20hp stainless steel air cooled modular chiller is delivered to Hainan province for customer’s application. This is a tailor-made 20hp air cooled chiller to meet special requirement for operation in coastal outdoor environment with high humidity and salty fog.