Home > News

News

We are glad to share with you about the results of our work, company news,and give you timely developments and personnel appointment and removal conditions.

What is the method of venting the industrial chiller in the ammonia refrigeration system?

Properly open the mixed gas inlet valve to allow the mixed gas in the refrigeration system of the industrial chiller to enter the air separator.

Simple steps to start the oil mold temperature machine

When the user receives the mold temperature controller, you should check whether the appearance is damaged after unpacking. If there is any damage, please do not sign for it. Take pictures and contact the manufacturer for assistance. If everything is normal, you can start the mold temperature accord......

What is the low-pressure treatment method for industrial chillers/refrigerant shortage?

When the water temperature is above 5°C and the pressure on the low-pressure gauge shows a low dryness of 2kg/cm2, it means that the industrial chiller/refrigerant is insufficient. Appropriate refrigerant.

What are the industrial chillers/poor heat dissipation and treatment methods?

When the heat dissipation of the cooler of the industrial air cooler is poor, the compression and efficiency are low, and the operating current increases.

Are there any regulations on the operation of drum type plastic mixer ? What is the process?

There are some operation rules and procedures of drum type plastic mixer:

How does the chiller work?

In the industry, the chiller is divided into air cooled chiller and water cooled chiller. In terms of temperature control, the chiller is divided into low temperature chiller and normal temperature chiller. The normal temperature is generally controlled in the range of 0 degrees to 35 degrees. Cryog......

<...17 18 19 20 21...37 >

We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy

Reject Accept