How the screw chiller helps the sand mill cool down during the grinding process

The screw chiller lowers the temperature of the sand mill by exchanging heat between the cooling medium (such as cooling water or cooling oil) and the sand mill.

Sand mill is also called grinding machine, horizontal sand mill is a kind of widely used in paint, dye, paint, ink, medicine, magnetic

Powder, ferrite, photosensitive film, pesticides, paper and cosmetics and other non-metallic mining industries, such as high-efficiency wet ultra-fine grinding and dispersing machinery, generate heat during the grinding process, so the cooling water of the chiller is needed to achieve cooling. Effect.

The larger the volume of the grinder and the more the quantity, the greater the power of the matching chiller. The grinder with small capacity and power only needs to be equipped with a low-power chiller. If you need to consult how the grinding machine is equipped with the power of the chiller, please consult the Jiusheng chiller manufacturer.

Specific steps are as follows:

1.Connect the screw chiller to the cooling system of the sand mill: Pipes and valves can be used to connect the chiller to the sand mill to ensure that cold water can flow into the sand mill's cooling system.

2.Adjust the working parameters of the screw chiller: according to the needs of the sand mill, set the parameters such as the temperature, flow and pressure of the screw chiller. Typically, the cold water temperature needs to be adjusted to a level lower than the operating temperature of the sander.

3. Turn on the screw chiller: Start the screw chiller so that it starts to circulate and pump cold water to the cooling system of the sand mill. Make sure that the cold water can flow continuously and maintain a stable cooling effect.

4.Monitor the temperature of the sand mill: use temperature sensors and other equipment to monitor the temperature change of the sand mill in real time. According to the monitoring results, the parameters of the screw chiller can be adjusted to achieve a better cooling effect.

5. Regularly check the equipment: ensure that the equipment is within the normal range. Care should be taken to follow the operating procedures during operation to avoid damage to the equipment to ensure a long service life.

Through the above steps, the screw chiller can effectively help the sand mill cool down during the warm grinding process, maintain a stable working temperature of the sand mill, and improve the working efficiency and life of the sand mill.