What power chiller does the 800KG extruder match?

The chiller can be divided into two types in the application of the extruder, one is to cool the extrusion die, and this one can use a standard chiller. There is another type of water tank for cooling the extruder line groove. This model needs to use a shell-and-tube chiller (the evaporator is a shell-and-tube closed type). Jiusheng will teach you to match the corresponding power of the 800KG extruder Chiller. Extrusion capacity 800KG/H. The chilled water flow rate is 20m³/H. If it is an air-cooled chiller, choose 40HP cooling capacity, and the model is JSFL-40. If it is a water-cooled chiller, choose 40HP cooling capacity. The model is JSSL-40. The water-cooled chiller needs to be connected to a pipeline water pump and a water tower. The air-cooled chiller can be used independently and is easy to install.

JSFL-40, 40HP air-cooled chiller core parameters:
Refrigeration capacity: 126KW, compressor power: 40HP/30KW, voltage frequency: 3PH-380V-50HZ (you can consult customer service to customize voltage frequency according to different countries), compressor brand: Panasonic, water tank capacity: 350L, evaporator structure: plate Tubular/(shell-and-tube) condenser structure: finned, pump power: 3750W, refrigerant model: R22 (you can consult customer service to customize environmentally friendly refrigerants), inlet and outlet diameter: DN80, weight 1200KG.

JSSL-40, 40HP water-cooled chiller core parameters:
Refrigerating capacity: 126KW, compressor power: 40HP/30KW, voltage frequency: 3PH-380V-50HZ (you can consult customer service to customize voltage frequency according to different countries), compressor brand: Panasonic, water tank capacity: 360L, evaporator structure: plate Tube type, condenser structure: shell and tube type, water pump power: 3750W, refrigerant model: R22 (you can consult customer service to customize environmentally friendly refrigerants), inlet and outlet diameter: DN80, weight 1050KG.

Principle reference diagram of air-cooled shell and tube chiller


Working principle diagram of extruder and chiller

Summary: The application of chiller to extruder can improve the production efficiency of product molding, and it is also suitable for extruders of insulating materials such as PVC, LSHF, TPU, LDPE, and XLPE. The extruders for single-color, double-color, double-layer and three-layer extrusion operations of wire and cable are cooled. The purpose of cooling is to make the temperature fluctuate less around the calibrated value when the product is extruded; moreover, if the temperature is too high, the screw will be easily damaged. The life of the extruder also has an impact, and it has many functions such as saving energy. It is a very practical device. Recycling cooling water can save energy and resources and realize environmental protection.

If there is any industry that needs cooling, but you don’t know how much power to match, you can leave a message to us, or contact plus friends +86-13925748878 (same number on WeChat)/(same number on whatsapp), email: jiusheng@dgchiller.com, we will Will provide you with technical solutions. Looking forward to your consultation, thank you!