What power chiller does the 200KG extruder match?

The chiller can be divided into two types in the application of the extruder, one is to cool the extrusion die, and this one can use a standard chiller. There is another type of water tank for cooling the extruder line groove. This model needs to use a shell-and-tube chiller (the evaporator is a shell-and-tube closed type). Jiusheng will teach you to match the corresponding power of the extruder with a 200KG output. Chiller. The extrusion capacity is 200KG/H. The chilled water flow rate is 5.0m³/H. If it is an air-cooled chiller, choose 10HP cooling capacity, and the model is JSFL-10. If it is a water-cooled chiller, choose 10HP cooling capacity. The model is JSSL-10. The water-cooled chiller needs to be connected to a pipeline water pump and a water tower. The air-cooled chiller can be used independently and is easy to install.

JSFL-10, 10HP air-cooled chiller parameters: (standard type, shell and tube type parameters need to be confirmed with customer service)
Refrigerating capacity: 30KW, compressor power: 10HP/7.5KW, voltage frequency: 3PH-380V-50HZ (you can consult customer service to customize voltage frequency according to different countries), compressor brand: Panasonic, water tank capacity: 145L, evaporator structure: Coil type/(shell-and-tube) condenser structure: fin type, pump power: 750W, refrigerant model: R22 (you can consult customer service to customize environmentally friendly refrigerants), inlet and outlet diameter: DN40, weight 380KG.

Core parameters of JSSL-10, 10HP water-cooled chiller: (standard type, shell and tube type parameters need to be confirmed with customer service)
Refrigeration capacity: 30KW, compressor power: 10HP/7.5KW, voltage frequency: 3PH-380V-50HZ (you can consult customer service to customize voltage frequency according to different countries), compressor brand: Panasonic, water tank capacity: 140L, evaporator structure: Coil type, condenser structure: shell and tube type, water pump power: 750W, refrigerant model: R22 (you can consult customer service to customize environmentally friendly refrigerants), inlet and outlet diameter: DN40, weight 450KG.

Air-cooled chiller reference diagram
Application diagram of extruder matching chiller
 
Working principle diagram of extruder and chiller

Summary: The application of the chiller to the extruder can comprehensively improve the smoothness of the surface layer of the product, reduce the surface layer of the product and internal stress, so that the product does not shrink or deform and accelerate the product setting, thereby greatly improving the production efficiency of wire forming. It is also applicable Used in PVC, LDPE, XLPE, LSHF, TPU and other insulating materials for wire and cable single-color, double-color, double-layer, three-layer extruders for cooling, protection of equipment life, energy saving and many other functions. Chiller series Rapid cooling of the extruder is possible. The chiller for extruder can be divided into PLC control type and traditional control type according to different control methods. It is a very practical equipment. Recycling cooling water can save energy and resources and realize environmental protection.

If there is any industry that needs cooling, but you don’t know how much power to match, you can leave a message to us, or contact plus friends +86-13925748878 (same number on WeChat)/(same number on whatsapp), email: jiusheng@dgchiller.com, we will Will provide you with technical solutions. Looking forward to your consultation, thank you!